The installation of household elevators is not conducive to installation in many aspects. Taking the shaft as an example, unlike in public spaces, there are not too many restrictions because household elevators are installed in a small space area at home, and the operation of the elevator can also produce noise. These are all factors that need to be taken into consideration. Follow the editor to understand together.
In terms of installation, the elevator shaft should not be arranged close to the bedroom or living room; The minimum thickness of the concrete wall on the adhesive surface is 150mm, and the minimum thickness of the ring beam is 150mm; The bottom pit of the shaft should be kept dry, clean, and free from water accumulation. Since the installation process cannot be careless, it can only be changed from the elevator structure.
The general arrangement of the main guide rails in elevators is on both sides of the car, and the structure of the backpack rack breaks this common principle by placing the main guide rails and auxiliary guide rails on the same side of the car, which has changed the direction of force on the guide rails structurally. The compact backpack style structure makes more effective use of the shaft space. The backpack rack rails are placed on the same side, eliminating the need to occupy the space of the hoistway at the same time. This allows for sufficient layout space for the elevator car and other components, and also requires smaller dimensions for the top and bottom floors.
The position of a household elevator is very flexible, which can be either side mounted or rear mounted, providing flexibility in the layout of the shaft. Additionally, adjustments can be made to the position of the door opening based on the door opening method.
